|
|
|
| |
|
| |
 |
 Design |
|
A single optical fiber coated with a buffer layer of reinforced aramid yarn is covered by an extruded outer jacket in diameter sizes between
1.6mm - 3.0mm. The design of tight buffer is to apply thermoplastic directly to the fiber coating and its diameter sizes are available up to 900um. Using longitudinal aramid yarn as strength member, the tight buffer optical fiber cables extrude colored outer jacket over the aramid yarn.
Other designs are also available upon customers’ requests to meet each specified requirements and conditions.
|
| |
| Application |
|
Simplex is a flexible, flame-retardant, non-metalic cable recommended for use in telecommunication station between the optical line system and the fiber frame distribution (OFD). It is also suitable for data networks (LAN).
- Fiber to The Desk
- Pigtails and Patch Cords
- Dropped Ceiling, Try and Conduit pplication |
| |
| Features |
|
- Available in single mode and multi-mode fibers
- Highly flexible and light weight for easy handling
- Flame-retardant PVC, Hytel, Nylon and LSZH
buffer
- Flame-retardant PVC, PVDF, FR-PE and LSZH
outer jacket
- Aramid yarn strength member reinforcement
- Easy stripping for quick splicing
- UL-listed riser-rated OFNR (UL-1666), Cable
meets NEC sections 770-53(b) for use in vertical nbsp;runs in building riser shafts or from floor to floor
- UL-listed plenums-rated OFNP (UL-910), Cable
meets NEC sections 770-53(a) for use in duct, plenums and air-handling spaces |
|
|
| |
| Construction |
|
 |
| The Color Code of Buffer |
| SMF (9/125) |
Yellow |
| MMF (50/125) |
Orange |
| MMF (62.5/125) |
Gray |
|
|
| |
| Cable Technical Data |
|
Part
Number
(Standard) |
Buffer
Diameter
(um) |
Jacket
Diameter
(mm) |
Cable
weightt
(kg/km) |
Tensile Load
(N) |
Minimum
Bending Radius
(mm) |
Temperature
(℃) |
Supplied
Length
(m) |
| Installing |
Operating |
Installing |
Operating |
Installing |
Operating |
SM-
SP/PR16
-YL |
650 |
1.60 |
2.4 |
80 |
40 |
40 |
20 |
-15~+50 |
-20~+70 |
4,000 |
SM-
SP/PR18
-YL |
650 |
1.80 |
3.0 |
80 |
40 |
40 |
20 |
-15~+50 |
-20~+70 |
4,000 |
SM-
SP/PR20
-YL |
900 |
2.00 |
3.6 |
180 |
90 |
50 |
30 |
-15~+50 |
-20~+70 |
4,000 |
SM-
SP/PR24
-YL |
900 |
2.40 |
5.3 |
220 |
100 |
50 |
30 |
-15~+50 |
-20~+70 |
2,000 |
SM-
SP/PR28
-YL |
900 |
2.80 |
6.9 |
220 |
100 |
50 |
30 |
-15~+50 |
-20~+70 |
2,000 |
SM-
SP/PR29
-YL |
900 |
2.90 |
8.2 |
220 |
100 |
50 |
30 |
-15~+50 |
-20~+70 |
2,000 |
SM-
SP/PR30
-YL |
900 |
3.00 |
8.6 |
220 |
160 |
50 |
30 |
-15~+50 |
-20~+70 |
2,000 |
|
| |
| Ordering Informationable |
|
 |
| |
1. Select Fiber Type
S : 9/125 SMF (Single mode fiber)
M : 50/125 MMF (Multi-mode fiber)
H : 62.5/125 MMF (Multi-mode fiber)
3. Select Jacket Materials
V : PVDF (Thermoplastics Polyvinylidene
Fluoride)
E : FR-PE (Flame-retardant Polyethylene)
L : LSZH (Low Smoke Zero ("O") Halogen)
P : FR-PVC (Flame-retardant Polyvinyl Chloride)
5. Select Cable Outer Diameter
EX) 16 : 1.60mm |
2. Select Buffer Materials
N : PA-12 (Polyamid ; Nylon®)
H : TPEE (Thermoplastics Polyester
Elastomer ; Hytrel®)
L : LSZH (Low Smoke Zero ("O") Halogen)
P : FR-PVC (Flame-retardant Polyvinyl
Chloride)
4. Select Flame Retardancy Grade
L : LSZH Type
P : OFNP Type
R : OFNR Type
6. Select Jacket Color Abbreviation
EX) BL : Blue |
| |
|
| ♣ Printing of outer jacket (OPTIONAL according to CUSTOMER) |
|
| |
| Cabled Attenuation |
|
| Fiber Types |
SMF (9/125)
(Single Mode Fiber)
1310nm / 1550nm |
MMF (50/125)
(Multi-Mode Fiber)
850nm / 1300nm |
MMF (62.5/125)
(Multi-Mode Fiber)
850nm / 1300nm |
Maximum Attenuation
(dB/km) |
0.40 / 0.25 |
3.5 / 1.5 |
3.7 / 1.5 |
Typical Attenuation
(dB/km) |
0.35 / 0.20 |
2.5 / 0.6 |
3.0 / 1.0 |
|
|
| |
|
|
|
